after instaling windows updates DVD ROM not reconized and not appear in my computer
after installing windows updates DVD ROM not recognized and not appear in my computer and cannot installed corectly again even if i uninstall dvd software and tring to reinstall from net using windows tools
my labtob is samsung R590
Solutions to the Problem after instaling windows updates DVD ROM not reconized and not appear in my computer
Do these to clear corruption and repair/replace damaged/missing system files.
Start - type in Search box - COMMAND find at top of list - RIGHT CLICK - RUN AS ADMIN
How to Repair Windows 7 System Files with System File Checker
Then run checkdisk (chkdsk).
How to Run Disk Check in Windows 7
After the above :
References to Vista also apply to Windows 7.
Stage 1 : Please do all the below even if you have done some before as it is often the total
process which solves the issue.
Try this - Control Panel - Device Manager - CD/DVD - double click the device - Driver's Tab -
click Update Drivers (this will likely do nothing) - then RIGHT CLICK the drive - UNINSTALL -
REBOOT this will refresh the default driver stack.
Even if drive is not shown continue
Then work your way through these - remember the drive could be bad, could have a loose
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Manually try this fix if the 314060 Fixit did not work
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs -
a Mr Fixit
The DVD drive does not function after you install Windows 7
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
When you insert a CD or a DVD, Windows Vista may not recognize the disc
Your CD or DVD drive cannot read or write media - A Mr Fixit
CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
setup after booting from the DVD (AHCI)
CD-R drive or CD-RW drive is not recognized as a recordable device
Hardware devices not detected or not working - A Mr Fixit
Another possibility is that the cables are loose.
Remove ALL power, then check cables in both
Remove and replace, do not just snug.
For laptops you can often clean the power and
data contacts with a pencil eraser.
Some DVD drives do not use the Windows default drivers so check with the System maker and
device maker to see if there is firmware or drivers for you drive if needed.
Stage 2 : You could have drive issues as the CD/DVD is actually 4 drives in 1 case ( CD & DVD
burn and CD and DVD read).
So it is not unusual for 1 or 2 parts to not function while the others
do so properly.
Did you complete the troubleshooter for the drive that still does not work? There are some
registry entries that the troubleshooter does not fix and those "might" be the cause.
Check with your System Maker and Device maker for both possible firmware updates and the
correct Registry entries for your drive.
These are the keys I think are the ones in question - for the CD/DVD drive sub-keys of course
as there will other sub-keys in these keys.
Be sure to ask for specific keys involved as well as
You probably can find more info here and maybe even the exact registry settings for your
CD/DVD drive from someone with the same model.
Forums - a lot of real expert help
Use DevManView to locate CD/DVD in registry (be careful and make a Restore Point before
changing anything) - find the device in DevManView and then Right Click on it Open in RegEdit.
DevManView - Free - an alternative to the standard Device Manager of Windows, which displays
all devices and their properties in flat table, instead of tree viewer
Hope this helps.
If you failed to fix it, another option is to call Microsoft and walk through the process with a technician. To do this, dial "1-800-936-5700". Explain the error that you received and the steps in the update process during which it was displayed. The technician will be able to walk through the steps from getting a new product key to finishing the installation.
Recommended Method to Fix the Problem: after instaling windows updates DVD ROM not reconized and not appear in my computer:
How to Fix after instaling windows updates DVD ROM not reconized and not appear in my computer with SmartPCFixer?
1. Click the button to download SmartPCFixer . Install it on your computer. Open it, and it will scan your system. The errors will be shown in the list.
2. After the scan is finished, you can see the errors and problems which need to be repaired.
3. The Repair part is done, the speed of your computer will be much higher than before and the errors have been fixed. You can also use other functions in this software. Like dll downloading, windows updating and print spooler error repair.
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: [Anwsered] adobe flashplayer not working with internet explorer 9,Advice for PivotTable,advent modena laptop built-in webcam not working,adobe flash player will not load Tech Support,Troubleshoot:Adobe Flash Player replacement Q?????? Error,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded